Work of Art
Cincinnati's new art center is being lauded for its structural animation and innovative use of form. Rendering this sculptural edifice in concrete and steel within a limited...
Thermal Cyclone Washing for Remediation of Petroleum Contaminated Soils
Thermal Cyclone Washing (TCW) is a soil remediation technology developed and tested at the University of Alabama in Huntsville. TCW is a combination of thermal, chemical, and physical...
Characterization of Anaerobic Microbial Consortium Response to Thiol-Reactive Compounds
The activity of anaerobes in wastewater treatment processes can be limited when a toxicant enters the system. For certain toxicants, along with the decrease in metabolic activity, an efflux...
Materials and Manufacturing Processes
This chapter introduces the basic materials used in the manufacturing of composite structures. It will help the line designer in understanding how the different elements of the fiber-matrix...
Quality Assurance
The user is responsible for ensuring the quality of products purchased. Therefore, the user of fiber-reinforced polymer (FRP) products determines the level of quality that will be accepted....
Breakwaters '99
First International Symposium on Monitoring of Breakwaters
The papers present state-of-art methods and technologies that are used in the structural and environmental monitoring of rubble mound breakwaters. Structural monitoring concerns the structural...
Physical Model of Current-Induced Scour at Ventura Harbor
This paper describes a 1:25-scale movable-bed physical model study of scour resulting from longshore current passing through a narrow gap on the leeside of the detached breakwater at Ventura...
Berm Breakwaters?Design, Construction and Monitoring
The philosophy of the fieldwork of Berm breakwaters was applied in Iceland. A few case histories were described with emphasis on quarry investigations, design, construction and monitoring....
Comparison of Hydrodynamic Parameters for a Floating Breakwater
The U. S. Army Engineer Research and Development Center is in the process of developing a Rapidly Installed Breakwater System (RIBS) for use in Joint Logistics Over the Shore Operations...
In Situ Behavior of Breakwaters in Constantza Port?Romania
In order to build breakwaters, especially in the areas with heavy storms, a special analysis on the several factors is necessary. In addition, surveillance of time behavior of breakwaters...
Montioring and Modeling of Tandem Breakwater System at Hammond, IN
A tandem breakwater system was constructed in 1989-90 to provide protection for a large marina at Hammond, IN, at the south end of Lake Michigan. A five year monitoring program (1993-98),...
Design and Construction of the Pier J Breakwaters at the Port of Long Beach, California
Several different alternatives to mitigate surge activity were investigated. The most acceptable solution was a pair of new breakwaters that altered the basin geometry to change the basin...
Construction Factors and Monitoring Methods Relating to the Performance of Ventura Breakwater Core Loc Repair
In 1999 the Los Angeles District of the U.S. Army Corps of Engineers (USACE) repaired the north Ventura breakwater head. The head was rebuilt using 2-ton underlayer stone armored with...
St. George Habor?Berm Breakwater Construction Considerations
During the period 1984-1987 three berm breakwaters with a total length of approximately 800 meters were constructed at St. George Harbor on St. George Island in the Pribil of Chain of...
Applications of Multibeam Echo Sounding with Topographic Mapping for Monitoring of Rubble Mound Breakwaters
Analysis of data from the breakwater monitoring program indicates the integration of multibeam survey capability with the increased accuracy of OTF DGPS positioning and advanced data management...
Application of Multibeam Echo Sounding and Side Scan Sonar for Mapping of Shoreline Protection Revetments
The use of multibeam survey methodology coupled with high precision positioning systems for the mapping of shoreline protection features and the adjacent offshore areas allows development...
Geotechnical Aspects of Beach Restoration
Large-scale beach restoration undertaken by the U.S. Army Corps of Engineers in Florida requires millions of cubic yards of beach quality sand. Exploration for these sand resources starts...
Stochastic Simulation of the Colorado River Flows Using SAMS
The main purpose of this presentation is to illustrate the applicability of SAMS to the Colorado River system. For this purpose we have utilized monthly data at 29 sites in the basin....
Stochastic and Deterministic Origins of Aquatic and Riparian Habitats
Development of aquatic and riparian habitats involves interactions among large numbers of climatic, geomorphic, hydrologic, and vegetative processes over time. A major component of these...
Predicting Droughts for the South Platte River System
In this paper we apply probability theory and stochastic processes to determine drought properties, particularly drought duration. Spccilicslly, we model the sequences of wet and dry years...
Return to search